TECH

StatikPulse · StatikPulse

I have a set of plans for a bead roller die that I'd like to get made. Can anyone recommend a place that could do it at a decent price?

Rottnkid · Rottnkid

Hey Guys I haven't gotten anything plated in years, I'd like to get a couple small pieces done for the Edsel. I heard Alberta is cheapest due to environmental laws. Any truth to that? Any recommendations on who does decent work that won't break the bank? Thanks G -- Edited by Rottnkid on Monday 8th of D...

Plodger · Plodger

So, my 55' Dodge Crusader started running really rough (chugging, underpowered). Checked the plugs...black as black can be. Switched those, but basically still running just as poorly. Took off the air filter assembly (tiny thing obviously added recently). (Without any air filter)Car runs like...

Plodger · Plodger

It's that time of year to do my first oil change on my 1955 Dodge Crusader. Any ideas on where I could buy "Oil Filter Cartridges for 1955-1959 Plymouth & Dodge 6-cyl" engines? Or thoughts on alternatives to it (i.e. an adapter kit instead).

Englishbob · Englishbob

Getting parts for my 302 build and I have the choice of using a 2 or 4 barrell intake and carb. Considering this is going to be a daily driver which should I run?

Scruff · Scruff

Am getting ready to start a new project and looking to see if anyone out there could help. I'm looking for some plans for a 2''x3'' rectangular tube chassis for a 32 Ford Tudor sedan. Looking to do a build with the body channelled even with the bottom of the rail. Will be going suicide front end with the 32 a...

meoracing · meoracing

Hey guys...just killed myself today and replaced all the rotors and brake pads on my truck. So now I have 4 rotors that are scrap but certainly have some weight to them. Anyone know if they are worth anything for scrap.....or should I throw them out one at a time in my garbage pail????

Rottnkid · Rottnkid

No matter how hard I try this cap will not twist off!!!!! -- Edited by Rottnkid on Friday 21st of September 2012 10:30:10 PM

Topic		Started By	Replies	Views	Last Post
	Machinist to make bead roller dies (Preview) I have a set of plans for a bead roller die that I'd like to get made. Can anyone recommend a place that could do it at a decent price?	StatikPulse	0	1254	May 8, 2015 by StatikPulse
	Chrome Plating (Preview) Hey Guys I haven't gotten anything plated in years, I'd like to get a couple small pieces done for the Edsel. I heard Alberta is cheapest due to environmental laws. Any truth to that? Any recommendations on who does decent work that won't break the bank? Thanks G -- Edited by Rottnkid on Monday 8th of D...	Rottnkid	5	1295	Dec 11, 2014 by Rottnkid
	Thoughts on air filters? (Preview) So, my 55' Dodge Crusader started running really rough (chugging, underpowered). Checked the plugs...black as black can be. Switched those, but basically still running just as poorly. Took off the air filter assembly (tiny thing obviously added recently). (Without any air filter)Car runs like...	Plodger	3	1113	Aug 7, 2014 by Plodger
	55' Dodge Oil Filters? (Preview) It's that time of year to do my first oil change on my 1955 Dodge Crusader. Any ideas on where I could buy "Oil Filter Cartridges for 1955-1959 Plymouth & Dodge 6-cyl" engines? Or thoughts on alternatives to it (i.e. an adapter kit instead).	Plodger	5	1514	Apr 15, 2014 by Plodger
	2 or 4 bbl. (Preview) Getting parts for my 302 build and I have the choice of using a 2 or 4 barrell intake and carb. Considering this is going to be a daily driver which should I run?	Englishbob	6	1723	Dec 17, 2012 by meoracing
	Winter project (Preview) Am getting ready to start a new project and looking to see if anyone out there could help. I'm looking for some plans for a 2''x3'' rectangular tube chassis for a 32 Ford Tudor sedan. Looking to do a build with the body channelled even with the bottom of the rail. Will be going suicide front end with the 32 a...	Scruff	5	1407	Oct 4, 2012 by LOSER
	Scrap value of rotors (Preview) Hey guys...just killed myself today and replaced all the rotors and brake pads on my truck. So now I have 4 rotors that are scrap but certainly have some weight to them. Anyone know if they are worth anything for scrap.....or should I throw them out one at a time in my garbage pail????	meoracing	3	1104	Oct 4, 2012 by meoracing
	A little help on a Friday (Preview) No matter how hard I try this cap will not twist off!!!!! -- Edited by Rottnkid on Friday 21st of September 2012 10:30:10 PM	Rottnkid	11	1699	Sep 26, 2012 by 65LOSER
Page 1 of 1 sorted by